Novacom Telephone Company, Inc.  Business Telephone Systems Installation & Service Since 1981

Home

Search

Mission
Statement


Local Area Networks (LAN)

Wide Area Networks (WAN)

Call Center

Testimony

Customer Portal

 

Avaya IP Office IP406 V.2 Control Unit-Recommended Configuration to 158 telephones
two T-1 circuits and four copper backup lines.

The IP406 V2 control unit is a stackable unit with  19" rack mounting
on a Novacom provided racking kit. Most Novacom installation reorganize often disorganized computer area room wiring.
The IP406 V.2 includes:

  • Eight digital station (DS) ports for supported 2400, 4400, 5400, 6400
    and T3 Series phones plus 3810 wireless four line (US) phones.

  • Two Analog telephone ports (up to 32 Ports).

    • Two wire home-like telephones and residential wireless

    • Caller ID capable – a variety of standards

  • Eight 10/100 Mbps LAN Switched ports (Layer-2, unmanaged).

  • Support for optional embedded voicemail/auto-attendant (Compact Flash card)

  • 9-pin DTE Port (for maintenance or Feature Key connection for application licensing).

  • X.21/V35 WAN interface.

  • Support for up to 6 IP Office Expansion Modules:

    • Analog Phone modules (8, 16, 30 Analog)

    • Digital Station modules (16, 30 Digital)

    • Analog Trunk Module  (16 Outside Lines)

  • External O/P socket supporting two relay on/off switch ports, e.g. for door entry systems.

  • Audio input port for external music on hold source.

  • One or two trunk interface card slots for analog, BRI, PRI (T1, E1) or CAS (E1R2)

  • Internal socket for IP Telephony expansion – voice compression modules
    (from 4 to 30 channels)

  • Internal socket for internal modem (2 or 12) for Remote Access Services

  • 40 Data channels

  • Up to 30 Voicemail  ports and ACD call hold paths.

 

Expansion Modules
Through support of up to six external Expansion Modules, IP406 can be enhanced to support a mixture of analog, digital
or IP phones, to maximum of 188 phones in several combinations. The number of simultaneous T3 IP phone calls is limited
to the number of VCM channels available up to thirty. If additional analog trunks are required, these can be aggregated
in groups of 16 on each analog expansion module

Data Channels
A Data Channel is used for Remote Access (RAS), Internet Access, and Voicemail sessions. A data channel is an internal
signaling resource used whenever a call is made from the IP network to an exchange line (Central Office). For example,
our people surfing the Internet will use a single data channel since they all share the same line to the ISP. Two people
remotely accessing the Office LAN from home will use two data channels since they have "dialed in" on separate lines.
IP extensions do not use data channels.

Modems and Voice Compression Modules/Voice Over Internet Protocol (VoIP) Platform
You can add additional hardware to the IP406 system to add one modem card (2 or 12 V.90 modems) and 1 Voice Compression Module (VCM).
The VCM supports from 4 to 30 simultaneous Voice over IP sessions and is recommended for either providing networking among many sites over a
Wide Area Network (WAN) or supporting IP Telephones and Soft phones.  IP Office does not rely upon VoIP for internal calling on your Local Area Network (LAN) for calling concurrently with your often very large size digital data files; LAN network congestion is not a problem with the Novacom
configured approach.